Tampilkan postingan dengan label structural. Tampilkan semua postingan
Tampilkan postingan dengan label structural. Tampilkan semua postingan

Analytical model edge cannot have a length of zero (0)

Posted by Unknown Senin, 25 November 2013 0 komentar
We are seeing this error on a received Structural model:
Analytical model edge cannot have a length of zero (0)

Revit does not offer a solution - you can't Delete Checked, and you can't press OK.  It just keeps coming back.


Unticking the "Structural" instance parameter for the hosting floor will work (it just gets rid of the problematic Analytical Floor), even if unticking the "Enable Analytical Model" box in the Properties Palette won't...

However, I think this is a bug or at least an undocumented problem that needs a better fix.

Some forums mention the issue, but there is no real solution yet:
Analytical model edge cannot have a length of zero... - Autodesk Community
Analytical Model Edge Warning

Baca Selengkapnya ....

Using a Super Void Generic Model to Cut Anything

Posted by Unknown Kamis, 07 Februari 2013 0 komentar
I had a Structural Framing member (a portal frame) and I wanted to demolish only the overhanging part of it.  Using methods like Cut By Face would not have any proper respect for Phasing, so I thought "I'll use an in-place Structural Framing void".  Guess what?  In-place families can not cut a Structural Framing family.  What now?  Read on below the bars...



EDIT
Great tip in the comments from Michael Clothier - just use Parts!  Turns out I am guilty of not using current Revit functionality...



You can use a Generic Model Component with a Void, and set the Cut with Voids When Loaded property to Yes:

Here is one I prepared earlier, for you to download and use:
SuperVoid Family download

Ok, once you have loaded and placed this family, you can resize it to suit and then use Cut Geometry to slice up your Structural Framing:

But guess what?  It STILL does not respect Phasing!  Revit will think that the Structural Framing is 'cut forever'.  Workaround - copy the original Structural Framing element, Paste Aligned to same place and then use another SuperVoid to chop that one with the opposite geometry.  Now that you have two bits, you can set Phasing to suit.  This is starting to get messy though, and it may all be better if you just had two different Structural Framing families to make this work...

You will also notice that the SuperVoid family has model lines locked to the edges.  Use the instance parameter Edge Lines vis to turn these off.

Heads-up from the Autodesk Forums:
Create a Generic Model . Just model a void extrusion e.g. Enable Cut with Void.
Place the void family and cut it with your framing family.....
Model in Place won't work.

Regards Jordi
via
Void component cutting beams - Autodesk Discussion Groups

Baca Selengkapnya ....

25 videos for Structural Revit Users

Posted by Unknown Selasa, 08 Januari 2013 0 komentar
AutodeskEd's Youtube channel has been very busy - I have collected 25 videos specifically relating to Structural users, including information on:
  • Reinforcement
  • Rebar
  • Assemblies
  • Parts
  • Loads
  • Interoperability
Link to playlist:
http://www.youtube.com/watch?v=2p1NoxzJz1A&feature=share&list=PLdw8FwXDx_djMvsIrcdzRMyEZ4WSBV4Fj


 


Check out lot's more at:
Autodesk Building Solutions channel -- http://www.youtube.com/user/AutodeskBuilding?feature=watch

Baca Selengkapnya ....
Trik SEO Terbaru support Online Shop Baju Wanita - Original design by Bamz | Copyright of android tv.