Home / tekla / Tekla and Revit 2014

Tekla and Revit 2014

Posted by Unknown Minggu, 03 November 2013 0 komentar

Some up-to-date info on data exchange between Tekla and Revit, including IFC and SDNF workflows (from revit structure blog):
The main purpose of the IFC import into Tekla is to allow the fabricator to accurately build a model from the consultants Revit model. However, you can convert certain objects from the IFC file to native Tekla objects such as beams, columns, footings etc. This is clearly useful rather than building a model from scratch. I tried this on a few beams and columns and again found no discrepancies with the original Revit Structure 2014 model, however, as you would expect the stairs translated to a bounding box. See the below image including the report.
...
I also imported an IFC model from Tekla to Revit with some fairly good results that are fine for coordination purposes. I would imagine that this may be better in a product such as Navisworks...
...
The best way to incorporate the analytical model from Tekla to Revit is to transfer the model as CIMsteel (Note that you will need to install the SDNF Import/Export for Autodesk Revit 2014). This gives you the option of transferring the analytical model

TERIMA KASIH ATAS KUNJUNGAN SAUDARA

Judul: Tekla and Revit 2014
Ditulis oleh Unknown
Rating Blog 5 dari 5

Semoga artikel ini bermanfaat bagi saudara. Jika ingin mengutip, baik itu sebagian atau keseluruhan dari isi artikel ini harap menyertakan link dofollow ke https://androidtv7.blogspot.com/2013/11/tekla-and-revit-2014.html. Terima kasih sudah singgah membaca artikel ini.